Automatic Wire Harness Taping Machine

Full wrapping
Select “Full wrapping”, tread on foot pedal to start operating, press “Wheel closure switch”, the machine operates at full speed and stops operation when the foot pedal is released.
Point wrapping:
Select point wrapping, enter the number of circles you want, tread on foot pedal to start operating, the machine will not stop until the number of circles reaches without treading on foot pedal.
Multi-segment wrapping
Select “Multi-segment wrapping”, and then press “Multi-segment setting”. 50 segments are provided for setting. You can set according to the length of wire branch. You should set as required and the remaining is left. Tread on the foot pedal, the machine will stop automatically after the first segment is completed, and then you should tread on the foot pedal again and the machine will complete the second segment operation, as so on. After the last segment is completed, you should press “Reset” to start the production of a second line.
Tape width:
The tape width is 20MM generally; width setting will directly affect the wrapping density.The smaller the width is, the larger the overlap surface is. The bigger the width is, the smaller the overlap surface is.
Running speed:
The maximum speed is 5, the minimum speed is 1.
Number of turns for point wrapping:
Set the number of circles for point wrapping
Wire diameter:
Edge size can be adjusted according to wire diameter for two wheels.
Parameter setting:
Parameter setting is only available for administrator